CAT6 UTP Cable supports Gigabit Ethernet (1000 Base-T) standard.

Operates at a bandwidth up to 250 Mhz.

This cable well exceeds the requirements
of TIA/EIA-568.C.2 Category 6 ISO/IEC Class E

Features

• Comply with Cat.6 specifications
• 4-pair unshielded twisted pair (UTP) cable
• Pairs are braided in aluminum foil with drain wire
• 23 AWG solid copper conductor for superior conductivity
• PE insulation
• PE central cross
• FR PVC/LSZH Jacket
• Verified compliant with EIA/TIA standards by ETL
• CUL-listed
• Packaged in an easy-to-pull box for easier installation

Specifications

Category : 6 UTP Solid cable

Conductor : 23 AWG (Solid)

Conductor Meta : Conductor Meta : Bare Copper

Insulation Materia : HD-PE

OD : 6mm ±0.2

Jacket hardness : 45P (90A ± 2A, Shore)

Heat-resistant : 75 degree C minimum (T)

CAT5e UTP Cable supports Gigabit Ethernet (1000 Base-T) standard.

Operates at a bandwidth up to 100 Mhz.

This cable well exceeds the requirements
of TIA/EIA-568.C.2 and ISO/IEC 11801

Features

• Comply with Cat5e specifications
• 4-pair shielded twisted pair cable
• 24 AWG solid copper conductor
• Pairs are wrapped in polyester tape and aluminum foil with drain wire
• PE insulation
• FR PVC Jacket
• Verified compliant with EIA/TIA standards by ETL
• CUL-listed
• Packaged in an easy-to-pull box for easier installation

Specifications

Category : 5e SFTP Solid cable

Conductor : 24 AWG Multi-cores (Solid)

Conductor Meta : Bare Copper

Insulation Materia : HD-PE

Outside-Tape Metal: MYLAR

Overlap Rate : 25%

Drain Wire : 24 AWG(0.500 ±0.007mm)

Jacket hardness : 45P (90A ± 2A, Shore)

Material : PVC UL94V-0

Heat-resistant : 75 degree C minimum (Temperature limited)

• CAT5e UTP Cable supports Gigabit Ethernet (1000 Base-T) standard.
• Operates at a bandwidth up to 100 Mhz.
• This cable well exceeds the requirements of
  TIA/EIA-568.C.2 and ISO/IEC 11801

Features

• Comply with Cat5e specifications
• 4-pair shielded twisted pair cable
• 24 AWG solid copper conductor
• Pairs are wrapped in polyester tape and aluminum foil with drain wire
• PE insulation
• FR PVC Jacket
• Verified compliant with EIA/TIA standards by ETL
• CUL-listed
• Packaged in an easy-to-pull box for easier installation

Specifications

Category : 5e SFTP Solid cable

Conductor : 24 AWG Multi-cores (Solid)

Conductor Meta : Bare Copper

Insulation Materia : HD-PE

Outside-Tape Metal: MYLAR

Overlap Rate : 25%

Drain Wire : 24 AWG(0.500 ±0.007mm)

Jacket hardness : 45P (90A ± 2A, Shore)

Material : PVC UL94V-0

Heat-resistant : 75 degree C minimum (Temperature limited)

• CAT6 SFTP Cable supports Gigabit Ethernet (1000 Base-T) standard
• Operates at a bandwidth up to 250 Mhz.
• Tinned Copper Screening gives protection against EMI and avoid signal loss.
• Better Mechanical Properties of cable.
• This cable well exceeds the requirements of TIA/EIA-568.C.2

Features

• Comply with Cat6 specifications
• 4-pair shielded twisted pair cable
• 23 AWG solid copper conductor
• Pairs are wrapped in polyester tape and aluminum foil with drain wire
• High Density Polyethylene Insulation
• FR PVC Jacket
• Verified compliant with EIA/TIA standards
• Packaged in an easy-to-pull box for easier installation

Specifications

Category : 6 SFTP Solid cable

Conductor : 23 AWG Multi-cores (Solid)

Conductor Meta : Bare Copper

Insulation Materia : HD-PE

Pairs : 2 Insulated conductors twisted together

Shield : Aluminum / Polyester Foil Tinned copper Braiding

Sheath : PVC/LSZH

Cable Diameter : 7.5 mm nominal

• Enhanced performance cable for transmission of high speed data, digital and analogue voice and video (RGB) signals on LANs. Supports Gigabit Ethernet (1000 baseT) standard.
• Operates at bandwidth of 250 MHz.
• This cable well exceeds the requirements of TIA/EIA-568-C.2.

Features

• Suitable for Burial Cables
• High EMI Interference surroundings
• Confirming to EIA/TIA 568-C.2 and IEC/ISO 11801
• Operates at bandwidth of 250 MHz

Specifications

Conductor : Solid Bare Electrolytic Grade Copper

Nominal Conductor Diameter : (23 AWG) 0.550 ± 0.015

Insulation : Polyethylene

Rip Cord : Yes

Inner Jacket : PVC

Thickness of Inner Jacket : 0.65 to 0.70 mm

Armouring : G.I. Wire

Size of Wire : 0.90 ± 0.030mm

Sequential Marking : At Every Meter

Temperature Rating : -20 to +60 deg. C

Outer Jacket : PE (Suitable for Burial )

Thickness of Outer Jacket : 0.85 mm (Nom.)

Colour of Jacket : Black

Approximate OD(approx) : 9.70 mm

Filler : HDPE

• CAT6 UTP LSZH Cable enhanced the performance for transmission of high speed data, digital and analogue voice and video (RGB).
• It supports Gigabit Ethernet (1000 Base-T) standard.
• Operates at a bandwidth up to 250 Mhz.

Features

• Comply with Cat.6 specifications
• 4-pair unshielded twisted pair (UTP) cable
• 23 AWG solid copper conductor for superior conductivity
• Frequency 250 MHz
• PE insulation
• PE central cross
• FR LSZH Jacket

Specifications

Category : 6 UTP Solid cable LSZH

Conductor : 23 AWG (Solid)

Conductor Meta : Conductor Meta : Bare Copper

Insulation Material : HD-PE

Pairs : 2 Insulated conductors twisted together

Sheath : LSZH

Cable Diameter : 6.1 mm nominal

• Enhanced performance cable for transmission of high speed data, digital and analogue voice and video (RGB) signals on LANs.
• Supports Gigabit Ethernet (10GbaseT) standard.
• Operates at bandwidth of 500MHz.

Features

• Comply with Cat.6A specifications
• 4-pair unshielded twisted pair (UTP) cable
• 23 AWG solid copper conductor wit a frequency of 500 MHz
• HD-PE insulation, PE central cross
• FR PVC/LSZH Jacket
• Verified compliant with EIA/TIA standards by ETL
• Packaged in an easy-to-pull box for easier installation

Specifications

Category : 6A UTP Solid cable

Conductor : 23 AWG (Solid)

Conductor Meta : Bare Copper

Insulation Material : High Density Polyethylene

Sheath : PVC/LSZH

Cable Diameter : 8.0mm Nominal

• Gateway Netconnect Category 5e keystone jacks are RJ45 8P 8C 50u jacks suitable for 22-26 AWG stranded and solid wire, compatible with both 110 & Krone punch down tools.
• They are available in universal labels color coded for T568A and T568B wiring schemes

Features

• RJ45 8P 8C 50u" Jack
• Terminating 4 pairs, 23-24 AWG cable
• Universal labels color-coded for T568A and T568B wiring schemes
• Fitting 1U 24 port High-Density
• Keystone panel

Specifications

RJ45 Jack :

Housing : ABS+PC, UL 94V-0, with optional color

RJ45 Jack Contact :

Material : Phosphor Bronze with Nickel Plated

RJ45 Jack Contact :

Housing : PC+Glass Fiber, UL 94V-2

Terminal : Phosphor Bronze with Tin plated

Contact Bracket : PC, UL 94V-2 Transparent color

Finish : 50 micro-inch Gold plated on Plug Contact area

IDC CAP : ABS, UL 94V-D

PCB : FR4, UL 94V-D

• Gateway Netconnect Category 5e patch panels are six port RJ45 modules applied and suitable for 22-26 AWG stranded and solid wire, compatible with both 110 & Krone punch down tools.
• Gateway Netconnect Cat5e patch panels have improved Cable Mangement with optional Cable Managementbar termninating 4 pairs UTP cable.

Features

• Six-port RJ45 modules applied
• ID stripes for identifying port allocations
• IDC compatible with 110 & Krone tool
• Terminating 4 pairs, 22-26 AWG, unshielded cable
• Improved cable management with an optional cable management bar (Simple type, or "T" slot type)
• Universal labels color-coded for T568A and T568B wiring schemes

Specifications

Identification:

I.D. Plate : PVC.Transparent color Paper

RJ45 Jack :

Housing : ABS, UL 94V-0 3-2.

RJ45 Jack Contact :

Material : Phosphor Bronze with Nickel plated

IDC :

Housing : PC+Glass Fiber, UL 94V-2

Terminal : Phosphor Bronze with Tin plated

Jack Bracket Set : ABS, UL 94V-0

Contact Bracket : PC, UL 94V-2. Transparent color

Finish : 50 micro-inch Gold plated on Plug contact area

Support Bar : SPCC, 1.5 mm thickness with Black (RAL 9005) color painted

PCB : FR4, UL 94V-0

• Gateway Netconnect Cat5e patch cords are high quality four pair twisted stranded cable terminated with RJ45 modular plugs at both the ends.
• It is TIA/EIA 568-C.2 standard.

Features

• Tight conductor twist and cable construction for good performance
• Tangle free latch prevents snags
• Boot provides easy access in high density applications and reliability for consistent performance
• Contacts plated with gold for a strong and consistent connection to support

Specifications

RJ45 Jack:

Housing : ABC + PC, UL 94V-2 Transporent color

RJ45 Jack Contact :

Material : Phosphor Bronze with Nickel Plated

IDC :

Housing : PC+Glass Fiber, UL 94V-2

Terminal : Phosphor Bronze with Tin plated

Contact Bracket : PC, UL 94V-2 Transporent color

Finish : 50 micro-inch Gold plated on Plug Contact area

IDC CAP : ABS, UL 94V-D

PCB : FR4, UL 94V-D

• The shielded Cat5e patch panel is eight ports RJ-45 modules applied and suitable for 22-26 AWG stranded and solid wire, compatible with 110 & Krone punch down tools.
• This type of panel is highly recommended for use in areas where horizontal cabling is in proximity to electrical facilities that generate high levels of electromagnetic interference.
• The high performance, high density connectors complied with

Features

• Hand screw, easy to open cover
• Eight port RJ45 modules applied
• Jack shutter to keep dust away
• Friendly installation, right angle between IDCs and RJ45 jacks
• ID stripes for identifing port allocations
• IDC compatible with 110 & Krone tool

Specifications

Panel : SECC, 1.2mm thickness with black color printed

RJ45 Jack Housing : PBT+15%GF, UL 94V-0

RJ45 Jack Contact :

Finish : Min 3 mm 50 micro-inches Gold plated over nickel plated

IDC Housing : PC+5% glass fiber, UL 94V-2

IDC Terminal material & finishing : Phosphor bronze with min 50 micro-inch tin plated Krone tool only, suitable for 22-26 AWG solid and stranded wire

Jack Bracket Set : ABS+PC, UL 94V-0 black color

Dust Cover : PC,UL 94V-0, transparent black color

Name Plate : PVC, transparent color

Ground wire : 18 AWG wire, with Green/Yellow striped color, length 40cm

RJ45 Jack Shield : ronze with nickel plated

• Gateway Netconnect Cat5e/Cat6 Patch Panel with LED Indicators is equipped with an indicator on each port.
• The LED patch panel is a powerful port identification solution, especially when you are managing large scale networking.
• This design saves time, energy and money, improving security and secrecy for your network

Features

• Compliant with ANSI/TIA-568-C.2, ISO/IEC 11801 Ed.2 and EN 50173-1 specification.
• Writable and erasable marking surfaces for each port on the front panel.
• Fast-Location lighting cable identification technology for saving cost and time for cable identification
• LED Status (Green/Red) for identifying on-line or off-line. (Connected to switch or not)

Specifications

High impact plastic housing, Flame retardant UL 94V-0

IDC Operating life : minimum 250 insertion

IDC Contact : 0.8mm thickness phosphor bronze, tin plating over nickel

Jack Contact : phosphor bronze,50μ Inch thickness gold over nickel

Jack Operating life : minimum 750 insertions

PCB : FR-4,1.6mm thickness

Panel : SECC,1.5mm thickness

• Gateway Netconnect RJ45 connector is a modular plug used primarily for network cabling and it is usually used for data transmission.

Features

• RJ45 modular plug supports 4 twisted pairs
• 8P8C type of connector
• Use for 24-26 AWG stranded wires

Specifications

Housing: PC, UL94V-2, transparent color

Contact Terminal: Copper Alloy

Finished: 03MU micro-inch gold plating

Operating temperature:-40⁰C to 80⁰C

Use for 24-26 AWG stranded wires,meet wiring scheme T568A/T568B

RJ45 modular plug supports 4 twisted pairs, 8 positions, 8 connectors of 100pcs/Pack

• Gateway Netconnect Cat 6 patch cords are high quality four pair twisted stranded cable terminated with RJ45 modular plugs at both the ends.
• It is TIA/EIA-568-C.2 standard.
• These patch cords are appropriate for high speed data transmission.

Features

• Tight conductor twist and cable construction for good performance
• Tangle free latch prevents snags
• Boot provides easy access in high density applications and reliability for consistent performance
• Contacts plated with gold for a strong and consistent connection to support

Specifications

Conductor : 24 AWG Multi-strands

Conductor Metal : Bare Copper

Insulation Material : High Densit Polyethylene

Material : PVC UL94V-0

Heat Resistance : 60°C minimum ( Temperature Limited)

Flame Property : The purpose of the vertical flame test is to screen out flammable wires. It follows the VW-1(UL) and FT-1 (CSA)

Insertion Cycles : 750 times

• Gateway Netconnect Cat6 patch cords are high quality four pair shielded twisted stranded cable terminated with RJ45 modular plugs at both the ends.
• It is TIA/EIA 568-C.2 atandard.
• The shielded cables helps to complete aproper ground connection and allows longer run with less effect of Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI).

Features

• Its appropriate for high speed data transmission
• High quality four pair shielded twisted stranded cable
• Less effect of Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI)
• It is TIA/EIA 568C.2 standard

Specifications

Conductor : 24 AWG Multi-strands

Conductor Metal : Bare Copper

Insulation Material : High Densit Polyethylene

Outside Tape Metal : MYLAR

Drain Wire : 26 AWG

Material : PVC UL94V-0

Color Code : Cool Grey 5C

Heat Resistance : 75°C minimum ( Temperature Limited)

Flame Property : The purpose of the vertical flame test is to screen out flammable wires.

• Gateway Netconnect Category 6 keystone jacks are RJ45 8P 8C 50u jacks suitable for 22-26 AWG stranded and solid wire, compatible with both 110 & Krone punch down tools.
• They are available in universal labels color coded for T568A and T568B wiring schemes and fit in high density keystone patch panel.

Features

• RJ45 8P 8C 50u" Jack
• Terminating 4 pairs, 23-26 AWG cable
• Universal labels color-coded for T568A and T568B wiring schemes
• Fitting 1U 24 port High-Density
• Keystone panel
• 3P/ETL verified unshielded EIA/TIA connecting hardware

Specifications

Identification

I.D. Plate : PVC. Transparent color Paper

RJ45 Jack

Housing : ABS, UL 94V-0.

RJ45 Jack Contact

Material : Phosphor Bronze with Nickel plated

ID

Housing : PC+Glass Fiber, UL 94V-2

Terminal : Phosphor Bronze with Tin

Jack Bracket Set : ABS, UL 94V-0

Panel : SPCC. 1.5 mm thickness with Black (RAL 9005) color painted

Contact Bracket : PC, UL 94V-2. Transparent color

Finish : 50 micro-inch Gold plated on Plug contact area

Support Bar : SPCC, 1.5 mm thickness with Black (RAL 9005) color painted

PCB : FR4, UL 94V-0

• Gateway Netconnect Category 6 keystone jacks are RJ45 8P 8C 50u jacks suitable for 22-26 AWG stranded and solid wire, compatible with both 110 & Krone punch down tool.
• They are capable of re-termination.
• They are availabe in universal labels color coded for T568A and T568B wiring schemes and fit in high density keystone patch panel.

Features

• RJ45 8P 8C 50u" Jack
• Terminating 4 pairs, 22-26 AWG cable
• Universal labels color-coded for T568A and T568B wiring schemes
• Fitting 1U 24 port High-Density Keystone panel

Specifications

Identification

I.D. Plate : PVC. Transparent color Paper

RJ45 Jack

Housing : ABS, UL 94V-0.

RJ45 Jack Contact

Material : Phosphor Bronze with Nickel plated

ID

RJ45 Jack: Housing-Zinc Alloy

Contact Bracket: PC

RJ45 Jack Contact: Material-Phosphor Bronze Stamp

Pin T + .35mm

Finish : 50 micro-inch gold plated on plug contat area

IDC: Phosphor Bronze

Pin T = 0.50mm with tin plating

IDC Cap: PC

Insertion Cycles: 750 times

IDC Life: 200 times Min.

• Gateway Netconnect Cat6 patch panel is eight ports RJ45 modules applied and suitable for 22-26 AWG stranded and solid wire, compatible with 110 & Krone punch down tools.
• Gateway Netconnect STP patch panels terminates 4 pairs STP cable and are rack mounted.

Features

• Hand screw, easy to open cover
• Eight port RJ45 modules applied
• Jack shutter to keep dust away
• RJ45 8P 8C 50u" Jack
• Terminating 4 pairs, 22-26 AWG cable
• Universal labels color-coded for T568A and T568B wiring schemes
• Fitting 1U 24 port High-Density Keystone panel

Specifications

ID Bracket : ABS + PC, UL 94V-0

Panel : SECC, 1.2mm thickness with optional color painted

RJ45 Jack

RJ45 Jack Contact: Material-Phosphor Bronze Stamp

RJ45 Jack Contact

Material : Phosphor bronze with nickel plated

Finish : 50 micro-inches Gold plated on plug contact area

IDC

Housing : PC+ glass fiber, UL 94V-2

Identification : ID plate, PVC, transparent color with paper

Contact Brackets : PBT + glass fiber, UL-94V-0

RJ45 Jack Shield : Bronze with nickel plated

Dust Cover : PC, UL94V-2

• Gateway Netconnect Category 6 patch panels are six port RJ45 modules applied and suitable for 22-26 AWG stranded and solid wire, compatible with both 110 & Krone punch down tools.
• Gateway Netconnect patch panels have improved Cable Management with optional Cable Management bar terminating 4 pairs UTP cable.

Features

• Six-port RJ45 modules applied
• ID stripes for identifying port allocations
• IDC compatible with 110 & Krone tool
• Terminating 4 pairs, 22-26 AWG, unshielded cable
• Improved cable management with an optional cable management bar (Simple type, or "T" slot type)
• Universal labels color-coded for T568A and T568B wiring schemes

Specifications

ID Plate : PVC. Transparent colour paper

Panel : SPCC, 1.5mm thickness with black (RAL 9005)color painted

RJ45 Jack

Housing : ABS, UL 94V-0

RJ45 Jack Contact

Material : Phosphor bronze with nickel plated

IDC

Housing : PC+ glass fiber, UL 94V-2

Jack bracket set: ABS, UL 94V-2

Support Bar SPCC, 1.5mm thickness with Black (RAL 9005) colour painted

PCB - FR4, UL 94V-0

Contact Brackets : PC, UL-94V-2. Transparent colour

Finish : 50 micro-inch Gold plated on plug contact area

Terminal : phosphor bronze with tin p

• Gateway Netconnect Cat6A patch cords are high quality four pair twisted stranded cable terminated with RJ45 modular plugs at both the ends.
• It is TIA/EIA 568C.2 standard.
• These patch cords are appropriate for high speed data transmission.

Features

• Tight conductor twist and cable construction for good performance.
• Tangle free latch prevents snags.
• Boot provides easy access in high density applications and reliability for consistent performance.
• Contacts plated with gold for a strong and consistent connection to support.

Specifications

Conductor : 24 AWG Multi-cores

Conductor Metal : Bare Copper

Insulation Material : HD-PE

Material : PVC UL94V-0

Heat Resistance : 75˚C minimum (Temperature limited)

Flame Property : The purpose of the vertical flame test is to screen out flammable wires.
It follows the VW-1 (UL) and FT-1 (CSA) standards

• Gateway Netconnect Category 6A keystone jacks are RJ45 8P 8C 50u jacks suitable for 22-26 AWG stranded and solid wire, compatible with both 110 & Krone punch down tools.
• They are available in universal labels color coded for T568A and T568B wiring schemes and fit in high density keystone patch panel.

Features

• RJ45 8P 8C 50u Jack
• Terminating 4 pairs, suitable for 23-26 AWG stranded and solid wire compatible with both 110 & Krone punch down tools
• Universal labels color coded for T568A and T568B wiring schemes
• Fitting ig density keystone patch panel
• Keystone panel

Specifications

RJ45 Jack

Contact Bracket : PC, UL 94V-2 Transparent color

RJ45 Jack Contact

Material : Phosphor Bronze with Nickel Plated

IDC

Housing : PC+Glass Fiber, grey color UL 94V-2

Terminal : Phosphor Bronze with Tin plated

IDC CAP : PC + glass fiber, UL 94-V2, white color

Contact Bracket : PC, UL 94V-2 Transparent color

Finish : 50 micro-inch Gold plated on Plug

• Gateway Netconnect Unloaded Patch Panel 24/ 48 port RJ45 modules applied and suitable for Cat 5e, Cat 6 and Cat 6A.
• Gateway Netconnect patch panel have improved cable management with optional cable management bar terminating 4 pairs UTP cable.

Features

• With cable management bar for improved management
• Staggered 24 port panel in 1U
• Staggered 48 port panel in 2U
• Mounts in standard 19 inch racks
• Feasible solution for lower interference and eliminate alien crosstalk

Specifications

Panel : PC + glass fiber, UL 94V-0, black color

Support Bar : PC + glass fiber, UL 94V-0, black color

• Angled UTP Blank Panel 1U 24 ports, 19inch available for Cat5e, Cat6, Cat6A UTP Keystone Jack
• Angled design easy to arrange patch cord from both side of the rack Front cable manager not required

Features

Specifications

All steel metal with high quality plastic powder cladding surface

Blank port, 24 ports for keystone jacks with back cable management bar

Angled design for high density installation

Gateway Netconnect offers a range of high quality, stylish designed Faceplates for professional installations, fully compliant for copper cabling systems. The Faceplates are inbuilt with shutters which are compatible with any standard colored keystones jacks. The Faceplates are available in one, two and four port variants.

• Stylish design in order to fit the wall perfectly
• Faceplate with Shutter.
• Single port, dual ports, 3 ports and 4 ports all available.
• Label Holder Included.

Specifications

UK style with shutter against dust and labeling plate

ID Plate : PC - transparent color

Face plate : ABS - with white color

Dust Cover : ABS - with white color

Screw : M3.5XL25.0mm