Enhanced performance cable for transmission of high speed data, digital and analogue voice and video (RGB) signals on LANs. Supports Gigabit Ethernet (1000 baseT) standard.
Operates at bandwidth of 250 MHz.
This cable well exceeds the requirements of TIA/EIA-568-C.2.
CAT6 UTP LSZH Cable enhanced the performance for transmission of high speed data, digital and analogue voice and video (RGB).
It supports Gigabit Ethernet (1000 Base-T) standard.
Operates at a bandwidth up to 250 Mhz.
Features
Comply with Cat.6 specifications
4-pair unshielded twisted pair (UTP) cable
23 AWG solid copper conductor for superior conductivity
Frequency 250 MHz
PE insulation
PE central cross
FR LSZH Jacket
Specifications
Category : 6 UTP Solid cable LSZH
Conductor : 23 AWG (Solid)
Conductor Meta : Conductor Meta : Bare Copper
Insulation Material : HD-PE
Pairs : 2 Insulated conductors twisted together
Sheath : LSZH
Cable Diameter : 6.1 mm nominal
UTP-23AWGSOLID-305M
Enhanced performance cable for transmission of high speed data, digital and analogue voice and video (RGB) signals on LANs.
Supports Gigabit Ethernet (10GbaseT) standard.
Operates at bandwidth of 500MHz.
Features
Comply with Cat.6A specifications
4-pair unshielded twisted pair (UTP) cable
23 AWG solid copper conductor wit a frequency of 500 MHz
HD-PE insulation, PE central cross
FR PVC/LSZH Jacket
Verified compliant with EIA/TIA standards by ETL
Packaged in an easy-to-pull box for easier installation
Specifications
Category : 6A UTP Solid cable
Conductor : 23 AWG (Solid)
Conductor Meta : Bare Copper
Insulation Material : High Density Polyethylene
Sheath : PVC/LSZH
Cable Diameter : 8.0mm Nominal
CAT 5E KEYSTONE JACK
Gateway Netconnect Category 5e keystone jacks are RJ45 8P 8C 50u jacks suitable for 22-26 AWG stranded and solid wire, compatible with both 110 & Krone punch down tools.
They are available in universal labels color coded for T568A and T568B wiring schemes
Features
RJ45 8P 8C 50u" Jack
Terminating 4 pairs, 23-24 AWG cable
Universal labels color-coded for T568A and T568B wiring schemes
Fitting 1U 24 port High-Density
Keystone panel
Specifications
RJ45 Jack :
Housing : ABS+PC, UL 94V-0, with optional color
RJ45 Jack Contact :
Material : Phosphor Bronze with Nickel Plated
RJ45 Jack Contact :
Housing : PC+Glass Fiber, UL 94V-2
Terminal : Phosphor Bronze with Tin plated
Contact Bracket : PC, UL 94V-2 Transparent color
Finish : 50 micro-inch Gold plated on Plug Contact area
IDC CAP : ABS, UL 94V-D
PCB : FR4, UL 94V-D
CAT5E LED PATCH PANEL
Gateway Netconnect Cat5e/Cat6 Patch Panel with LED Indicators is equipped with an indicator on each port.
The LED patch panel is a powerful port identification solution, especially when you are managing large scale networking.
This design saves time, energy and money, improving security and secrecy for your network
Features
Compliant with ANSI/TIA-568-C.2, ISO/IEC 11801 Ed.2 and EN 50173-1 specification.
Writable and erasable marking surfaces for each port on the front panel.
Fast-Location lighting cable identification technology for saving cost and time for cable identification
LED Status (Green/Red) for identifying on-line or off-line. (Connected to switch or not)
Specifications
High impact plastic housing, Flame retardant UL 94V-0
IDC Operating life : minimum 250 insertion
IDC Contact : 0.8mm thickness phosphor bronze, tin plating over nickel
Jack Contact : phosphor bronze,50μ Inch thickness gold over nickel
Jack Operating life : minimum 750 insertions
PCB : FR-4,1.6mm thickness
Panel : SECC,1.5mm thickness
CAT 6 UTP LOADED PATCH PANEL
Gateway Netconnect Category 6 patch panels are six port RJ45 modules applied and suitable for 22-26 AWG stranded and solid wire, compatible with both 110 & Krone punch down tools.
Gateway Netconnect patch panels have improved Cable Management with optional Cable Management bar terminating 4 pairs UTP cable.
Features
Six-port RJ45 modules applied
ID stripes for identifying port allocations
IDC compatible with 110 & Krone tool
Terminating 4 pairs, 22-26 AWG, unshielded cable
Improved cable management with an optional cable management bar (Simple type, or "T" slot type)
Universal labels color-coded for T568A and T568B wiring schemes
Specifications
ID Plate : PVC. Transparent colour paper
Panel : SPCC, 1.5mm thickness with black (RAL 9005)color painted
RJ45 Jack
Housing : ABS, UL 94V-0
RJ45 Jack Contact
Material : Phosphor bronze with nickel plated
IDC
Housing : PC+ glass fiber, UL 94V-2
Jack bracket set: ABS, UL 94V-2
Support Bar SPCC, 1.5mm thickness with Black (RAL 9005) colour painted
